Shenzhen Heng Yi Jia Technology Co., Ltd.

Powder Coating Line Machine,Electrostatic Powder Machine,Powder Coating Machine Spraying Equipment

+86-755-29492864

Home > Products > Powder coating machine > Powder coating spray machine
Product Categories
Online Service

Powder coating spray machine

Share to:  
    Payment Type: L/C,T/T,Western Union
    Incoterm: FOB,CIF,EXW,FCA
    Min. Order: 1 Set/Sets
    Delivery Time: 15 Days

Basic Info

Model No.: HYJ-D-0157

Additional Info

Packaging: wood packing

Productivity: 600

Brand: HENGYIJIA

Transportation: Ocean,Land,Air

Place of Origin: China

Supply Ability: 50

Certificate: CE ISO

Port: Shenzhen

Product Description

Powder Coating spray machine

Product Application

Manual electrostatic powder spray gun
Built-in high-intensity electrostatic module with circuit board electrostatic wall, no more difficult to spray recessed corners. The engineering plastic gun shell has high strength and long service life. User-friendly handle design reduces fatigue when holding.
Stainless steel powder buckets are made for food and materials. Alternate heat and cold do not break.
Electronic controller
Pneumatic controller
Powder spray gun
voltage pressure 220v / 50hz
Solenoid valve control voltage :DC24
Powder gun weight: about 450 g
Input power :AC220V/50HZ
Output pressure :0-0.6111Pa
safety standard: 1 p54
Input voltage: 0-100vac
Water content less than 1g/m?Air requirement: oil content less than 0.01g/m2
powder output: llla x 500 g/min

GUIDE

1. The connection of the compressed air supply. Connect directly from the compressed air line to the main air connection point at the rear of the control unit (Φ8 x PU tube)
Compressed air must be oil-free & water-free.
2. Use an air tube to connect the fluidized air outlet at the rear of the control unit and the fluidized air pressure reducing valve on the moving cart.
3. Grounding screw fix the grounding cable to the grounding point of the control unit, and clamp the collet of the 5 m long grounding cable to the spray booth or suspension equipment.
4. Connect the gun cable to the socket(gun) at the rear of the control unit with a 5-pin connector .
5. Connect spray gun, clean air output tube.
6. Insert the powder pump, connect the powder gun and the powder pump tube.
7. Connect the air delivery tube to the corresponding position on the rear of the controller and the powder supply pump
8. Connect the air supplementary tube to the corresponding position at the rear of the controller and the powder supply pump
9. Connect the main power supply to the interface as shown in the figure below. (SPRAY GUN installation diagram)



Main Features

1, the surface of the product is relatively rough, the paint can not level to make up for this defect, and the thickness of the powder is relatively thick, which can effectively fill and repair some of the defects of the parts themselves;
2 the surface of the product is more pinholes, the paint is prone to pinholes or bubbles, etc. Problems, if the appropriate temperature of thermal spray powder, this defect will improve a lot;
3, dusting can prevent corrosion of the surface of iron parts

Detailed Images

Machine Parts

Name: reciprocating powder coating guns

Brand: HENGYIJIA

Original: China

When the conveying air

(1) flows through the powder generator, the fluidized powder in the powder drum is sucked into the generator and sent to the spray gun through the powder paint tube (2), and the powder is charged with static electricity before being sprayed. There is also an electrostatic field between the grounded work object and the nozzle of the spray gun, and the electrostatic powder can be evenly attached to the surface of the work object.

Main Features

Name: Manual spray powder gun
Brand: HENGYIJIA
Original: China
Built-in high-intensity electrostatic module with circuit board electrostatic wall, no more difficult to spray recessed corners. The engineering plastic gun shell has high strength and long service life. User-friendly handle design reduces fatigue when holding.
Stainless steel powder buckets are made for food and materials. Alternate heat and cold do not break.

Machine Parts

Name: Automatic powder coating booth
Brand: HENGYIJIA
Original: China
The recycling cabinet has a vertical box structure with two layers in the middle and upper layers. The middle box is equipped with four paper filter cores, and the support of the pulse backflushing mechanism of the paper filter core is mounted on the bottom plate of the upper box, and the air supply cylinder and the pipeline for controlling the electromagnetic valve are placed on the wall of the upper box. A dust collecting bucket and a powder collecting trolley are fixed in the lower supporting frame, and an air extractor and an exhaust duct are arranged at the rear upper part of the cabinet.

Main Features

Name: Powder Bottom recovery system
Brand: HENGYIJIA
Original: China

The powder coating booth is stainless steel.

Related Products

Products Name with link

91.8% Response Rate

Products Name with link

91.8% Response Rate

Products Name with link

91.8% Response Rate

Looking for ideal Powder Coating Line Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Electrostatic Powder Machine are quality guaranteed. We are China Origin Factory of Powder coating machine Spraying Equipment. If you have any question, please feel free to contact us.

Product Categories : Powder coating machine

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Demi Wu Ms. Demi Wu
What can I do for you?
Chat Now Contact Supplier