Shenzhen Heng Yi Jia Technology Co., Ltd.
Model No.: HYJ-BF01
Clapboard: with Clapboard
Filter Number: 32
Medium Material: Fiberglass
Filtration Grade: HEPA Filter
Type: Bag Filter
Packaging: plastic packing
Place of Origin: China
Supply Ability: 200000 sets/year
Name: Bag filter (in effect bag filter, the effect of anti-static bag filter)
For the air conditioning system, intermediate filter to protect the system in the next level of the filter and the system itself, in the air purification cleanliness requirements are not strict places, the filter by the efficiency of the air can be sent directly to the user.
Aluminum frame bag filter using high-quality synthetic fiber or imported glass fiber for the filter to iron, galvanized iron or aluminum alloy frame for the structure, the internal spray cold drawn wire support frame.
1, each filter between a metal bar fixed, increase the strength and to prevent the filter bag at high wind speed, due to the friction of the wind and rupture.
2, each filter bag has six septum distribution in the bag width, to prevent the bag to withstand excessive pressure when the wind pressure, mutual shelter, reduce the effective filtration area and efficiency. 3, each filter bag edge are used ultrasonic fusion, with good air tightness and bonding strength, does not produce leakage or crack. 4, the use of ultra-fine synthetic fibers made of special weave, to avoid the old glass fiber materials may cause discomfort to the human body
3, the filter contains static fiber, the sub-micron dust filter efficiency is particularly good, high dust collection rate of high permeability, high life
There are 45%, 65%, 85%, 95%, 98% five kinds of efficiency of the bag filter can choose
Air Filter system pre-filter, is widely used in central air conditioning ventilation system. Clean Room, clean room between the two filters, pharmaceutical, hospital, electronics, food and other spray paint room higher clean air requirements level filtration system, the general building air filtration equipment
It can also be filtered as a front end of a highly efficient air filter to reduce the load on the high efficiency air filter and extend its service life. Due to the large windward size of the bag filter, it has a large dust holding capacity and a low wind speed, which is considered to be the best medium effect filter structure.
Resistance is small,
Ventilation is large;
Frame and support frame can be reused, replace the filter only need to replace the filter bag, and convenient, greatly reduce the operating costs.
Widely used in electronics, pharmaceutical, medical, food and other industries filtration system, is the best structure of the current efficiency filter.
Product efficiency specifications:
(45%), F6 (65%), F7 (95%), F8 (95%), F9 (98%);
Frame thickness series: 21mm, 25mm, etc .;
The general use of the filter for the three, composite non-woven fabrics, synthetic fiber and glass fiber imports.
Product replacement cycle:
In the rated air use conditions, 3-4 months that need to replace the filter; or when the filter resistance to 400Pa or more, you must replace the filter; If the filter is a clean filter, the replacement of the Filter, can be washed with water or a solution containing a neutral detergent, dry, and then replaced; up to allow cleaning twice, that must replace the new filter; such as the use of dust in the environment concentration, then this The life cycle will also be reduced.
Precautions for use:
1, regularly check the filter inlet surface with or without debris blocking the situation, whether the damage on the filter surface;
2, if the items plug the surface, it should be cleared;
3, the filter surface damage is serious, you must replace the new filter or replace the new filter to re-install;
4, the filter is installed, to ensure that the pressure margin with the box at a good seal to prevent air leakage;
5, can not use heavy objects to hit the surface of the filter, can not force to pull the filter media surface;
6, the installation should be the length of the filter bag length perpendicular to the ground to ensure that the air filter effect and increase the service life.
Synthetic fiber bag filter
Product Features · Large air volume
· Resistance is small
· High dust holding capacity
· Sturdy structure
Uses: Filtering of smaller particles in air filtration systems; pre-filtration of high efficiency filters and air filtration of large coating lines.
Frame: Aluminum or galvanized iron
Filter: density step by step increase the synthetic fiber, hot melt edge
Flame retardant standards:
Final resistance: (recommended
Maximum air volume: rated air volume
Temperature: 100 ℃
Effective anti-static bag filter
Blocking more than 0.5um dust particles
Large filtration area
High filtration efficiency
High dust holding capacity
Can be repeated cleaning and other advantages
Type: Bag filter
Frame: aluminum or stainless steel, zinc metal
Filter: Synthetic fiber
Level: 45%, 65%, 85%, 95%
Temperature: 100 ℃